Maxim Interface MAX96707 14 位 GMSL 串行器

Maxim MAX96707 14 位 GMSL 串行器是采用 4mm × 4mm TQFN 封装的紧凑型串行器，特别适合用于汽车摄像头应用。 在高带宽模式下，12 位线性或组合 HDR 数据类型的并行时钟值是 116MHz。 嵌入式控制通道在 I2C 模式下以 9.6kbps 至 1Mbps 的速度运行，允许对串行器、解串器 (SerDes) 和不受制于视频时钟的摄像头寄存器进行编程。 为了驱动更长的电缆，该 IC 有可编程预加重/去加重特性。 串行输出上有可编程扩频。 串行输出满足 ISO 10605 和 IEC 61000-4-2 ESD 标准。 供电电压范围为 1.7V 至 1.9V。

For driving longer cables, the IC has programmable pre/deemphasis. Programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC 61000-4-2 ESD standards. The supply range is 1.7V to 1.9V.FEATURES· Ideal for safety camera applications

· Works with low-cost 50Ω coax (100Ω STP) cables

· Error detection of video/control data

· High-immunity mode for robust control-channel EMC tolerance

· Retransmission of control data upon error detection

· Best-in-class supply current: 88mA (max)

· Pre/deemphasis allows 15m cable at full speed

· 24-Pin (4mm × 4mm) TQFN package with 0.5mm lead pitch

· High-speed data serialization for megapixel cameras

· Up to 1.74Gbps serial-bit rate

· 12.5MHz to 87MHz × 12-Bit + H/V data

· 36.66MHz to 116MHz × 12-bit + H/V data (through internal encoding)

· Multiple modes for system flexibility

· 9.6kbps to 1Mbps control channel in I2C mode (with clock stretch)

· Crosspoint switch accepts any input bitmap

· Modes for encoded VSYNC and HSYNC

· Reduces EMI and shielding requirements

· Programmable output spread spectrum

· Tracks spread spectrum applied at the parallel input

· 1.7V to 1.9V I/O supply

· Peripheral features for camera power-up and verification

· Built-In PRBS generator for BER testing

· Dedicated GPO for camera frame-sync trigger and other uses

· Remote/local wake-up from sleep mode

· Meets AEC-Q100 automotive specification

· -40°C to +115°C operating temperature

· ±8kV contact and ±15kV air IEC 61000-4-2 and ISO 10605 ESD protection应用· Automotive camera applicationsFUNCTIONAL

 BLOCK DIAGRAM